Selectronic Inverter Charger
+ Click to enlarge
The need to provide reliable electricity away from the city has always been challenging, be it village electrification, power for a remote community, a domestic home or a luxury leisure vehicle, high quality electricity is always required.
Together with a battery bank and associated equipment, the new PS1 range now gives you access to a most sophisticated and reliable power source. The PS1 is your complete power and control centre.
External shunt
Using an external shunt, a DC Load such as a fridge or a pump can be calculated for an accurate State of Charge reading. This shunt can also be programmed for use with another charging source such as a Wind Generator or Hydro generator.
Battery bank
Maintaining a healthy State of Charge(SoC) in your batteries is critical to provide maximum life and reliability of the batteries. The PS1 constantly monitors the battery SoC and uses the available energy from renewable sources, a generator or grid electricity to recharge the batteries if the State of Charge drops below a pre set level.
Integrated display
The comprehensive back lit LCD and 8 LEDs provide all the information you need to know for operating and programming your PS1. The thoughtful layout of the LCD screens can show you information such as Battery Volts, Battery Current (charge or discharge), Battery State of Charge % and Load kw’s all on one simple screen. All menus are intelligently grouped for easy programming.
Solar Modules
A 100amp internal shunt allows you to connect solar modules to the PS1 through a separate regulator, the energy can be counted for an accurate battery State of Charge. Solar Modules will reduce generator run times.
System analysis
Using our optional "Remote Link" software a computer can be plugged directly into the RS232 port for careful analysis of performance. Via a modem yoursystem integrator can control, adjust and analyse your PS1 from the convenience of their office.
Intelligent generator control
The ability to control an auto start generator is an impressive feature of the PS1. By constantly monitoring a number of key system parameters, the PS1 will startand stop an auto start generator whenever it is required. This process will ensure you have all the power you need.
Sophisticated programming options allow the day to be split into three sections, ensuring your generator is started at peak periods of the day such as meal times and will generally not run during the middle of the night unless essential. An intelligent algorithm within the PS1 ensures your generator is optimally loaded at all times and in the unlikely event of a failure to the power engine inside the PS1, it can start and stop the generator at up to 4 intervals per day to ensure fridges etc can maintain temperature. Using time of day, a generator can be started up to 4 times per day.
Running your AC load
Inverter power + Generator power = maximum power available
The PS1 can maintain true NO Break power to the home 24 hours a day. If you require more power than the PS1 can deliver, an auto start generator can be started in order to share the load. When your load reduces, the generator will be stopped. Clever.
PS1 3/24
24 volt
Continuous output - 3kw
Max output, 5 minutes - 4kw
Max overload, 0-5 seconds - 5kw
Max charge rate - 120 amps
Minimum Generator required - 5kva
58kg
PS1 5/24
24 volt
Continuous output - 5kw
Max output, 5 minutes - 6.5kw
Max overload, 0-5 seconds - 8kw
Max charge rate - 200 amps
Minimum Generator required - 8.7kva
72kg
PS1 6/48
48 volt
Continuous output - 6kw
Max output, 5 minutes - 8kw
Max overload, 0-5 seconds - 10kw
Max charge rate - 120 amps
Minimum Generator required - 10kva
73kg
PS1 10/48
48 volt
Continuous output - 10kw
Max output, 5 minutes - 13kw
Max overload, 0-5 seconds - 16kw
Max charge rate - 200 amps
Minimum Generator required - 15kva
87kg
PS1_ Brochure_Rev3_2006_08.pdf
Please contact us for more information and advice on the correct sized unit for your application.