Ropatec Wind Turbines
+ Click to enlarge
General
The Ropatec WindRotor is a vertically driven wind rotor which demonstrates special product characteristics through its unique construction. The system could be described as a hybrid solution, building upon the Savonius and Darrieus principles.
Wind generators can be a great form of renewable energy generation to charge your battery bank. They can produce energy in bad weather and given the right wind conditions, they can produce a lot of it.
Ropatec wind rotors will start producing energy at around 2m/s, but to make a wind generator viable you need to have a good average wind speed, upwards of 5m/s.
Construction
The WindRotor consists of the following components: turbine, generator, shaft, and charge regulator (all components refer to the WRE series). The generator is located in the core of the turbine. The installation finishes at the assembly plate or assembly cone. The plate can be mounted on a mast or on similar constructions. Because of the permanently produced generation, the build-up of an electromagnetic field is prevented and therefore no disruptions are created for cellular telephone transmission. The WindRotor can therefore also be mounted directly on GSM or UMTS masts.
The system is delivered in separate assemblies. These consist of:
2 blades ( 1)
2 consoles (2)
1 internal tube and generator (3)
2 housings for the core (4)
1 MultiSourcePower-Controller
1 mast (optional)
1 set of batteries (optional)
In addition, every installation is delivered with a technical handbook, assembly instructions,
and a guarantee certificate.
Innovative as a result of the following properties:
Independent of the wind direction
Low maintenance
High longevity start up at wind velocities of 2-3 m/s.
Nominal output at wind velocities of 14 m/s and higher
Nearly silent, even at high wind velocities
Does not require any mechanical/electronic adjustment (pitch regulation)
Does not require any cut-out mechanism
Does not create an electromagnetic field outside of the turbine
Problem-free operation as a hybrid system
More Information
ROPATEC Prelim Info Book.pdf
ROPATEC References_Pictures.pdf
WRE.007
Nominal output of the shaft at 14 m/s
750 W
WRE.007.pdf
WRE 007_Mast_Basement.pdf
WRE.015
Nominal output of the shaft at 14 m/s
1500 W
* See WRE.007 pdf, two of those will make up the WRE.015.
WRE.030
Nominal output of the shaft at 14 m/s
3000 W
WRE.030.pdf
WRE.030_Mast_Basement.pdf
WRE.060
Nominal output of the shaft at 14 m/s
6000 W
WRE.060.pdf
WRE.060_Mast_Basement.pdf
For more information and pricing, please do not hesitate to contact us at ecogise.